User Tools

Site Tools


products:imod:inair

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
products:imod:inair [2017/01/23 17:41]
modtronix
products:imod:inair [2017/01/23 17:46] (current)
modtronix
Line 196: Line 196:
 <WRAP right> <WRAP right>
 [{{http://​data.modtronix.com/​x/​imod__imod_hdr_h3_magnify_t.jpg?​direct&​140}}] [{{http://​data.modtronix.com/​x/​imod__imod_hdr_h3_magnify_t.jpg?​direct&​140}}]
-[{{http://​data.modtronix.com/​x/​imod__imod_inboard_and_floating_h3_w560.jpg?​direct&​140}}]+[{{http://​data.modtronix.com/​x/​imod__imod_inboard_and_floating_h3_m.jpg?​direct&​140}}]
 </​WRAP>​ </​WRAP>​
 Pin headers with 3.0mm long pins are assembled. Select this option if the module is going to be soldered into place. The picture on the right shows an example of an iMod module soldered onto a main board. Pin headers with 3.0mm long pins are assembled. Select this option if the module is going to be soldered into place. The picture on the right shows an example of an iMod module soldered onto a main board.
Line 207: Line 207:
 <WRAP right> <WRAP right>
 [{{http://​data.modtronix.com/​x/​imod__imod_hdr_h4_magnify_t.jpg?​direct&​140}}] [{{http://​data.modtronix.com/​x/​imod__imod_hdr_h4_magnify_t.jpg?​direct&​140}}]
-[{{http://​data.modtronix.com/​x/​imod__imod_inboard_and_floating_h4_w560.jpg?​direct&​140}}]+[{{http://​data.modtronix.com/​x/​imod__imod_inboard_and_floating_h4_m.jpg?​direct&​140}}]
 </​WRAP>​ </​WRAP>​
 Pin headers with 4.0mm long pins are assembled. Select this option if the module is going to be plugged into a low profile 5.7mm high female socket (2.54mm grid). Pin headers with 4.0mm long pins are assembled. Select this option if the module is going to be plugged into a low profile 5.7mm high female socket (2.54mm grid).
Line 218: Line 218:
 <WRAP right> <WRAP right>
 [{{http://​data.modtronix.com/​x/​imod__imod_hdr_h6_magnify_t.jpg?​direct&​140}}] [{{http://​data.modtronix.com/​x/​imod__imod_hdr_h6_magnify_t.jpg?​direct&​140}}]
-[{{http://​data.modtronix.com/​x/​imod__imod_inboard_and_floating_h6_w560.jpg?​direct&​140}}]+[{{http://​data.modtronix.com/​x/​imod__imod_inboard_and_floating_h6_m.jpg?​direct&​140}}]
 </​WRAP>​ </​WRAP>​
 Pin headers with 6.0mm long pins are assembled. Select this option if the module is going to be plugged into a standard 2.54mm female socket. Pin headers with 6.0mm long pins are assembled. Select this option if the module is going to be plugged into a standard 2.54mm female socket.
Line 229: Line 229:
 <WRAP right> <WRAP right>
 [{{http://​data.modtronix.com/​x/​imod__imod_hdr_hs_magnify_t.jpg?​direct&​140}}] [{{http://​data.modtronix.com/​x/​imod__imod_hdr_hs_magnify_t.jpg?​direct&​140}}]
-[{{http://​data.modtronix.com/​x/​imod__imod_inboard_and_floating_swiss_w560.jpg?​direct&​140}}]+[{{http://​data.modtronix.com/​x/​imod__imod_inboard_and_floating_swiss_m.jpg?​direct&​140}}]
 </​WRAP>​ </​WRAP>​
 Two 6 Pin headers with Round (Swiss) style pins are assembled. Select this option if the module is going to be plugged into female Round (Swiss) Sockets. This is very useful for prototyping! See picture on the right for some examples. Two 6 Pin headers with Round (Swiss) style pins are assembled. Select this option if the module is going to be plugged into female Round (Swiss) Sockets. This is very useful for prototyping! See picture on the right for some examples.
Line 241: Line 241:
 <WRAP right> <WRAP right>
 [{{http://​data.modtronix.com/​x/​imod__imod_hdr_pf_magnify_t.jpg?​direct&​140}}] [{{http://​data.modtronix.com/​x/​imod__imod_hdr_pf_magnify_t.jpg?​direct&​140}}]
-[{{http://​data.modtronix.com/​x/​imod__imod_inboard_and_floating_pf_w560.jpg?​direct&​140}}]+[{{http://​data.modtronix.com/​x/​imod__imod_inboard_and_floating_pf_m.jpg?​direct&​140}}]
 </​WRAP>​ </​WRAP>​
 Press-fit type pins are assembled. They can be pressed into 1.00mm holes on a 1.6mm thick (standard PCB thickness) target board. A press-tool might be required for production assembly. Once fitted to the target board, the board is very secure, and can not be removed by hand any more. The picture on the right shows an example of an iMod module mounted onto main board via press-fit connectors. Press-fit type pins are assembled. They can be pressed into 1.00mm holes on a 1.6mm thick (standard PCB thickness) target board. A press-tool might be required for production assembly. Once fitted to the target board, the board is very secure, and can not be removed by hand any more. The picture on the right shows an example of an iMod module mounted onto main board via press-fit connectors.
products/imod/inair.txt ยท Last modified: 2017/01/23 17:46 by modtronix