User Tools

Site Tools


products:lcd:raspberry-pi:lcd-7inch

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
products:lcd:raspberry-pi:lcd-7inch [2017/11/20 19:19]
modtronix
products:lcd:raspberry-pi:lcd-7inch [2018/11/13 00:03] (current)
modtronix
Line 19: Line 19:
   * Module dimension: 0mm x 0mm (0" x 0")   * Module dimension: 0mm x 0mm (0" x 0")
   * Operating Temperature -40°C to + 85°C   * Operating Temperature -40°C to + 85°C
- +  * HDMI Port 
 +  * Two USB port for touch screen and power. Both USB ports are identical.
  
  
Line 26: Line 26:
 Connection is very simply: Connection is very simply:
   * Connect the HDMI port on LCD to the HDMI port of the Raspberry Pi.   * Connect the HDMI port on LCD to the HDMI port of the Raspberry Pi.
-  * Connect the micro USB port next the the HDMI port to any USB port on the Raspberry Pi. +  * Connect ​any of the micro USB ports to any USB port on the Raspberry Pi. This will supply power to the LCD, and used for the touch screen interface
 +  * ENSURE to use the official RPi 2.5A power supply! This LCD draws a lot of power and will NOT work if a weak power supply is used! We have also experienced problems with the touch interface using non original power suppliers, most likely because they might have more ripple voltage.
  
  
products/lcd/raspberry-pi/lcd-7inch.txt · Last modified: 2018/11/13 00:03 by modtronix