This Wiki page contains additional information for the MOD-RELAY2-5V-10A from Modtronix.
For safety reasons we DO NOT recommend using this module with voltages above 12V. Any use of this module is at your own risk! Always take necessary safety precautions when working with high voltages to prevent electrical shock! We will take no responsibility for any damage, personal injury or death incurred due to using this unit with high voltages!
This modules contains 2 relays, rated at 5V and 10A. Each relay has a LED indicator. It can be used to control various appliances, and other equipment with large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
Each relay has an Optocoupler, providing optical isolation. Each relay also have a freewheeling diode protection.
This module has a 6 pin header(standard 2.54mm pitch) for connecting power (5V and GND), and controlling the 2 relays. These pins have the following functions: