This Wiki page contains additional information for the Modtronix PT4NZ-STM32 board. Please feel free to register and improve this page - user contributions are greatly appreciated!
This is a base board for our STM32 NZ range of boards. It had four iMod ports, and provides a 6 pin programming and debug connector that can be connected to our PGM-NUCLEO programmer/debugger, or PGM6NC adapter board.
The Eagle (v6.4.0) sch and pcb can be downloaded here(you might have to right click to download):
Eagle schematic(*.sch file) and Eagle PCB(*.brd file).
Below are some examples of this board with different iMod modules.