User Tools

Site Tools


products:nz-stm32:nz32-s303

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
products:nz-stm32:nz32-s303 [2017/02/20 23:14]
modtronix
products:nz-stm32:nz32-s303 [2017/02/20 23:14] (current)
modtronix
Line 8: Line 8:
 One new feature this board will have is a 8-way DIP switch located at the bottom of the board, where current battery connector is on the [[products:​nz-stm32:​nz32-sc151|NZ32-SC151]]. This can be used for setting the boards address when used in network applications. For example, wireless node, Semtech SX1276/​SX1278 LoRa node, RS485 node, CAN Bus node..... One new feature this board will have is a 8-way DIP switch located at the bottom of the board, where current battery connector is on the [[products:​nz-stm32:​nz32-sc151|NZ32-SC151]]. This can be used for setting the boards address when used in network applications. For example, wireless node, Semtech SX1276/​SX1278 LoRa node, RS485 node, CAN Bus node.....
  
-This board will be assembled with the low cost STM32F030C8T6 ​Microcontroller with 32K Flash and 4K RAM. It will have identical dimensions, and very similar pin-outs to our current [[products:​nz-stm32:​nz32-sc151|NZ32-SC151]] board.+This board will be assembled with the low cost STM32F030C6T6 ​Microcontroller with 32K Flash and 4K RAM. It will have identical dimensions, and very similar pin-outs to our current [[products:​nz-stm32:​nz32-sc151|NZ32-SC151]] board.
products/nz-stm32/nz32-s303.txt ยท Last modified: 2017/02/20 23:14 by modtronix